The Broken Spirals Prince Albert Wand is ready to provide you with unlimited intoxicating erotic stimulation that will leave you yearning for your next play session!
This intricately designed Prince Albert Wand is made from 316L Surgical Steel and has a mind blowing mirror like finish! It is approximately 108 mm (4 1/4 inches) in overall length with approximately 101 mm (4 inches) of the length being insertable. The hollow shaft has both smooth and ridged areas to add extra stimulation and heighten your pleasure.

The shaft is hollow but it does have a ball that screws into the end as a cap to the head of your dick to keep it closed up, but you can easily unscrew it to allow bodily fluids to flow through without having to remove the whole thing this way it is solid when needed and hollow when needed. You have three diameter choices available to choose from 8mm, 10mm, and 12mm, the ball cap size will vary with the diameter of the plug. Each wand comes with three pieces that attach to the side of the plug passing through your Prince Albert Piercing so that you can get a good fit.

They are all a standard 9/16 inch in length with a standard 12.7 mm (1/2 inch) ball on the end, but once screwed into the plug you have 9.5 mm (3/8 inch) from the plug to the 12.7 mm (1/2 inch) ball. These three pieces that pass through your piercing come in 2 gauge, 1 gauge, and 0 gauge each with the standard 12.7mm ( 1/2 inch) ball on the end. From the top of the shaft that passes through the piercing to the screw ball cap on the end of the plug is approximately 15.8 mm (5/8) of an inch. It is necessary to be sure that the specified dimensions for this piece will match up to fit with your piercing so that you are able to use it properly.

This baby covers all the bases not only will you be in awe of its alluring design, but also craving its spine tingling erotic stimulation!